CAMPlot
-------

Report Written : 11/04/2007 09:51:29
Design Path    : C:\BUP\Projects\100W HF PA\100W Bi-polar PA.pcb
Design Title   : 
Created        : 07/01/2007 16:28:25
Last Saved     : 11/04/2007 08:17:58
Editing Time   : 2052 min

Formatting Information
----------------------

    Gerber Output
    -------------

    Pulsonix 4.0 Gerber.dll 2651
    2.3 Format Absolute inches.
    Omit Leading zeroes.
    G01 assumed throughout.

    Line termination <*> <CR> <LF>.

    Aperture table defined in output file (RS-274-X).

    Hardware arcs allowed.

    Plane Isolation Gap 0.00.

    Excellon Drill Output
    ---------------------

    Pulsonix 4.0 NCDrill.dll 2658
    2.3 Format Absolute Imperial.
    Omit No zeroes.

    Tool sizes are in     thou


Plot Details
------------

    Gerber Output
    -------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Top).gbr

    Contains:        Top

    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    D-Code   Description

    D10      Round 0.64-
    D18      Round 2.50 Hole diameter 1.00
    D20      Round 0.30
    D22      Round 1.27
    D23      Round 0.64
    D28      Round 0.13
    D87      Round 0.03-
    D90      Round 0.30+
    D138      Round 3.00 Hole diameter 1.50
    D141      Round 2.00 Hole diameter 1.50
    D181      Round 2.00 Hole diameter 0.70
    D195      Round 2.00 Hole diameter 1.20
    D201      Round 5.00 Hole diameter 3.20
    D202      Oval 1.80 x 2.79+ Hole diameter 0.70 Rotation 90
    D203      Rectangle 1.00 x 1.80 Rotation 90
    D204      Round 2.00 Hole diameter 1.00
    D205      Oval 1.90 x 3.00 Hole diameter 1.00 Rotation 90
    D206      Round 2.00 Hole diameter 0.80
    D207      Round 4.00 Hole diameter 2.50
    D208      Round 4.02 Hole diameter 1.50
    D209      Round 2.50 Hole diameter 1.50
    D210      Rectangle 5.00 x 14.00
    D211      Round 4.00 Hole diameter 1.90
    D212      Round 2.50+ Hole diameter 0.70
    D213      Rectangle 3.00 x 6.30 Rotation 90
    D214      Rectangle 3.00 x 6.30
    D215      Round 5.00 Hole diameter 3.05

    Gerber Output
    -------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Bottom).gbr

    Contains:        Bottom

    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    D-Code   Description

    D10      Round 0.64-
    D18      Round 2.50 Hole diameter 1.00
    D20      Round 0.30
    D22      Round 1.27
    D23      Round 0.64
    D28      Round 0.13
    D87      Round 0.03-
    D90      Round 0.30+
    D138      Round 3.00 Hole diameter 1.50
    D181      Round 2.00 Hole diameter 0.70
    D201      Round 5.00 Hole diameter 3.20
    D202      Oval 1.80 x 2.79+ Hole diameter 0.70 Rotation 90
    D203      Rectangle 1.00 x 1.80 Rotation 90
    D205      Oval 1.90 x 3.00 Hole diameter 1.00 Rotation 90
    D207      Round 4.00 Hole diameter 2.50
    D209      Round 2.50 Hole diameter 1.50
    D211      Round 4.00 Hole diameter 1.90
    D212      Round 2.50+ Hole diameter 0.70
    D215      Round 5.00 Hole diameter 3.05
    D216      Round 5.00 Hole diameter 1.00
    D217      Round 3.00 Hole diameter 0.80
    D218      Round 4.00 Hole diameter 1.50
    D219      Round 3.50 Hole diameter 1.20
    D220      Round 4.00 Hole diameter 1.00
    D221      Round 4.01 Hole diameter 1.50
    D222      Rectangle 1.00 x 1.80
    D223      Round 2.80

    Gerber Output
    -------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Silkscreen Top).gbr

    Contains:        Silkscreen Top

    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    D-Code   Description

    D26      Round 0.13-
    D28      Round 0.13
    D85      Round 0.20
    D87      Round 0.03-
    D89      Round 0.20+
    D90      Round 0.30+
    D185      Round 0.10
    D224      Round 0.10+

    Gerber Output
    -------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Solder Mask Top).gbr

    Contains:        Solder Mask Top

    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    D-Code   Description

    D292      Round 2.75+
    D293      Round 5.25+
    D294      Oval 2.05+ x 3.05- Rotation 90
    D295      Round 2.25+
    D296      Rectangle 1.25+ x 2.05+ Rotation 90
    D297      Oval 2.15+ x 3.25+ Rotation 90
    D298      Round 3.25+
    D299      Round 4.25+
    D300      Round 3.75+
    D301      Round 4.27+
    D302      Round 4.26+
    D303      Rectangle 5.25+ x 14.25+
    D304      Round 2.75+
    D305      Rectangle 3.25+ x 6.55+ Rotation 90
    D306      Rectangle 3.25+ x 6.55+

    Gerber Output
    -------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Solder Mask Bottom).gbr

    Contains:        Solder Mask Bottom

    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    D-Code   Description

    D292      Round 2.75+
    D293      Round 5.25+
    D294      Oval 2.05+ x 3.05- Rotation 90
    D295      Round 2.25+
    D296      Rectangle 1.25+ x 2.05+ Rotation 90
    D297      Oval 2.15+ x 3.25+ Rotation 90
    D298      Round 3.25+
    D299      Round 4.25+
    D300      Round 3.75+
    D301      Round 4.27+
    D302      Round 4.26+
    D304      Round 2.75+
    D307      Rectangle 1.25+ x 2.05+

    Excellon Drill Output
    ---------------------

    Output File:     C:\BUP\Projects\100W HF PA\Output Files\100W Bi-polar PA(Through Hole).drl

    Contains:        <Through Hole>

    Drill Type:      All
    Scale:           1.000
    Mirrored:        No
    Rotated:         No
    Offset:          -11.33+    -160.55-mm
    Step & Repeat:   Not used


    Format     1
    Tool sizes included in output.

    Tool             Size        Count

    T001           00.028	   49
    T002           00.031	    6
    T003           00.039	   46
    T004           00.047	   10
    T005           00.059	   16
    T006           00.075	    2
    T007           00.098	    2
    T008           00.120	    4
    T009           00.126	    6

Summary Information
-------------------

    Outputs covered by CAM Plots
    ----------------------------

    Top: Gerber, Artwork, Enabled
    Bottom: Gerber, Artwork, Enabled
    Silkscreen Top: Gerber, Artwork, Enabled
    Solder Mask Top: Gerber, Artwork, Enabled
    Paste Mask Top: Gerber, Artwork
    Silkscreen Bottom: Gerber, Artwork
    Solder Mask Bottom: Gerber, Artwork, Enabled
    Paste Mask Bottom: Gerber, Artwork
    Documentation: Windows, Artwork
    <Through Hole>: Excellon, Drill, Enabled
    Drill Drawing: Gerber, Drill Drawing
    Drilling template: Windows, Artwork

    Outputs not covered by CAM Plots
    --------------------------------

    Layer Wires Top
    Layer Pin Names
    Layer Wires Bottom

                ---------------- End Of Report ----------------
